subject
Engineering, 26.11.2019 01:31 maru91

Afuel oil is burned with air in a boiler furnace. the combustion produces 813 kw of thermal energy of which 65z5 is transferred as heat to the boiler tubes that pass through the furnace. the combustion products pass from the furnace to a stack at 650 deg c. liquid water enters the boiler tubes at 20 deg c and leaves the tubes as saturated steam at 20 bar absolute. (a) calculate the rate (kg/sec) at which steam is produced. (b) estimate the volumetric flow rate of steam produced (m^3/sec) using the steam tables. (c) repeat part (b) using the ideal gas law. which result would you trust more, and why? (d) what happened to the 35% of the combustion energy that did not get transferred to the boiler tubes?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
question
Engineering, 06.07.2019 03:20
1kg of water contained in a piston-cylinder assembly undergoes two processes in series from an initial state where the pressure is 3.0 bar and the temperature is 150°c process 1-2: the water is compressed isothermally to a volume of 0.25 m^3 with 120 kj of work being done to the system. process 2-3: the water is heated at constant volume to a final pressure of 10 bar. a. find the change in internal energy for the system. b. calculate the amount of heat transferred, in kj. c. sketch both processes on a t-v diagram. (196.33 kj/kg, 76.33 kj)
Answers: 1
You know the right answer?
Afuel oil is burned with air in a boiler furnace. the combustion produces 813 kw of thermal energy o...
Questions
question
Mathematics, 20.11.2020 20:20
question
Mathematics, 20.11.2020 20:20
question
Mathematics, 20.11.2020 20:20
Questions on the website: 13722362