Engineering, 26.11.2019 01:31 Idontknow708

Water is the working fluid in a vapor power plant. superheated steam leaves the steam generator at 8.2 mpa, 540 ∘c, and enters the turbine at 7.5 mpa, 500 ∘c. the steam expands through the turbine, exiting at 8 kpa with a quality of 94%. condensate leaves the condenser at 5 kpa, 30 ∘c and is pumped to 9 mpa before entering the steam generator. the pump efficiency is 80%. part a a) determine the net work per unit mass of steam flow.

b) determine the heat transfer per unit mass of steam passing through the boiler

c) determine the thermal efficiency.

d) determine the heat transfer per unit mass of steam passing through the condenser.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

You know the right answer?

Water is the working fluid in a vapor power plant. superheated steam leaves the steam generator at 8...

Questions