Engineering, 26.11.2019 06:31 danielle413
Reservoir a delivers to reservoir b through two uniform pipelines aj and jb of diameters 300mm and 200mm, respectively. just upstream of the change in section, which is assumed gradual, controlled discharge of 30 l/s is taken off. length of aj = 3000 m; length of jb = 4000 m; effective roughness size of both pipes =0.015 mm; h = 25.0 m. determine the discharge to b, neglecting the loss at j.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
You know the right answer?
Reservoir a delivers to reservoir b through two uniform pipelines aj and jb of diameters 300mm and 2...
Questions
Arts, 02.12.2019 04:31
Mathematics, 02.12.2019 04:31
Mathematics, 02.12.2019 04:31
Mathematics, 02.12.2019 04:31
History, 02.12.2019 04:31
Mathematics, 02.12.2019 04:31
