Engineering, 26.11.2019 06:31 holamigosss
Acenter-cracked plate is loaded in tension and has dimensions of b = 40 mm, t = 5 mm, and large h, and it contains an initial crack of length 2ai = 8 mm. a zero-to-maximum cyclic load of 80 kn is applied, and the material has σy= 320 mpa, kic= 40 mpa√m.
(a)what is the crack length for plastic yielding, ay?
(b)what is the crack length for brittle fracture, ac?
(c) will the plate fail by
i. plastic yielding before fatigue crack growth,
ii. plastic yielding after fatigue crack growth,
iii. brittle fracture before fatigue crack growth, or
iv. brittle fracture after fatigue crack growth?
briefly explain why.
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Acenter-cracked plate is loaded in tension and has dimensions of b = 40 mm, t = 5 mm, and large h, a...
Mathematics, 31.01.2021 08:10
Biology, 31.01.2021 08:10
Mathematics, 31.01.2021 08:10
History, 31.01.2021 08:10
Mathematics, 31.01.2021 08:10
History, 31.01.2021 08:10
Mathematics, 31.01.2021 08:10
History, 31.01.2021 08:10