subject
Engineering, 26.11.2019 21:31 shyyyy13

Consider a pwm connected to an amplifier that drives a dc motor that draws a maximum current of 5a. it is designed to have a duty cycle of 50% to obtain this current. the operating conditions are such that at equilibrium, the torque requirement is 1/5th (or 20%) of the starting torque. what percentage duty cycle is required to obtain this torque? what is the corresponding average current?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Consider a pwm connected to an amplifier that drives a dc motor that draws a maximum current of 5a....
Questions
question
Mathematics, 05.05.2020 06:15
question
Mathematics, 05.05.2020 06:15
question
Chemistry, 05.05.2020 06:15
Questions on the website: 13722362