subject
Engineering, 26.11.2019 21:31 samueltaye

Adisc magnet is used to hold a piece of paper (0.1 mm thick) to the door of a refrigerator. the magnet is 6 cm in diameter and 0.75 cm thick. its mass is 500 grams. assuming that the coefficient of friction between the paper and the refrigerator is 0.3, what is the minimum remanent magnetism (in gauss) that the magnet must have in order to keep the magnet and paper from falling?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32Β°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
Adisc magnet is used to hold a piece of paper (0.1 mm thick) to the door of a refrigerator. the magn...
Questions
Questions on the website: 13722360