Engineering, 27.11.2019 05:31 sdawg420

The value of a saving account, v, after t years is given by:

v = p(1 + r/100/n)^nt

where p is the initial investment, r is the yearly interest rate in % (e. g., 7.5% entered as 7.5), and n is the number of times per year that the interest is compounded.

a. write a matlab program in a script file that calculates v. when the program is executed, it asks the user to enter the amount of the initial investment, the number of years, the interest rate, and the number of times per year that the interest is compounded. the output is displayed in the following format: "the value of a $xx investment at a yearly interest rate of x. x% compounded x times per year, after xx years is $.xx", where xxx stands for the corresponding quantities.
b. use the program to determine the value of a $20,000 investment after 18 years if the yearly interest rate is 3.5% compounded 6 times a year.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

You know the right answer?

The value of a saving account, v, after t years is given by:

v = p(1 + r/100/n)^nt

Questions