Engineering, 29.11.2019 05:31 6clevare

22.5-4. minimum liquid flow in a packed tower. the gas stream from a chemical reactor contains 25 mol % ammonia and the rest are inert gases. the total flow is 181.4 kg mol/h to an absorption tower at 303 k and 1.013 × 105 pa pressure, where water containing 0.005 mol frac ammonia is the scrubbing liquid. the outlet gas concentration is to be 2.0 mol % ammonia. what is the minimum flow l min ⁡ ′ using 1.5 times the minimum, plot the equilibrium and operating lines. ans. l min ⁡ ′ = 262.6kg mol/h

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

You know the right answer?

22.5-4. minimum liquid flow in a packed tower. the gas stream from a chemical reactor contains 25 mo...

Questions