Engineering, 29.11.2019 07:31 euniceyi56
For a bolted assembly with six bolts, the stiffness of each bolt is kb = 2 mlbf/in and the stiffness of the members is km = 14 mlbf/in per bolt. an external load of 80 kips is applied to the entire joint. assume the load is equally distributed to all the bolts. it has been determined to use 1/2 in-13 unc grade 8 bolts with rolled threads. it is desired to find the range of torque that a mechanic could apply to initially preload the bolts without expecting failure once the joint is loaded. assume a torque coefficient of k = 0.2.
a. determine the yielding factor of safety.
b. determine the overload factor of safety
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
You know the right answer?
For a bolted assembly with six bolts, the stiffness of each bolt is kb = 2 mlbf/in and the stiffness...
Questions
Mathematics, 11.03.2020 18:25
English, 11.03.2020 18:25
Mathematics, 11.03.2020 18:26
History, 11.03.2020 18:26
History, 11.03.2020 18:26
