subject
Engineering, 30.11.2019 00:31 himatasy

Aculvert must carry 4.3 m^3/sec. the culvert length will be 30 m with a slope of 0.3%. if the maximum permissible headwater level is 3.6 m above the culvert invert, what size corrugated-pipe culvert (n=0.025) would you select. the outfall will discharge freely. assume a square-edge entrance (ke=0.5).

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
Aculvert must carry 4.3 m^3/sec. the culvert length will be 30 m with a slope of 0.3%. if the maximu...
Questions
question
Mathematics, 08.10.2019 11:10
question
Mathematics, 08.10.2019 11:10
Questions on the website: 13722359