Asteel alloy is known to contain 93.8 wt96 fe, 6.0 wt% ni, and 0.2 wt% c.
(a) what is the approximate eutectoid temperature of this alloy?
(b) what is the proeutectoid phase when this alloy is cooled to a temperature just below the eutectoid?
(c) compute the relative amounts of the proeutectoid phase and pearlite.
assume that there are no alterations in the positions of other phase boundaries with the addition of ni.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.