subject
Engineering, 02.12.2019 19:31 sonyfan

Consider an airplane that weighs 14,700 n and cruises in level flight at 300 km/hr at an altitude of 3000 m (rho = 0.90926 kg/m3 ). the wing has a surface area of 17.0 m2 and an aspect ratio of 6.2. assume that the lift coefficient is a linear function of the angle of attack and that αl0 = -1.2º. if the load distribution is elliptic, calculate the value of the circulation in the plane of symmetry (γ0), the downwash velocity, the induced drag coeff

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
Consider an airplane that weighs 14,700 n and cruises in level flight at 300 km/hr at an altitude of...
Questions
question
Biology, 24.02.2021 01:00
question
Social Studies, 24.02.2021 01:00
question
English, 24.02.2021 01:00
question
Mathematics, 24.02.2021 01:00
question
Biology, 24.02.2021 01:00
Questions on the website: 13722361