Engineering, 03.12.2019 22:31 nourmaali

The allowable bending stress is ơallow-24 ksi and the allowable shear stress is tallow-14 ksi 10 kip 5 kip/ft 4 ft 6 ft 4 ft select the lightest-weight wide-flange beam that will safely support the loading. use the following chart for reference. wide-flange sections or w shapes fps units flange x-x axis -yaxis web thickness width thickness area depth designation in x lb/ft w16 x 57 w16 x 50 w16 x 45 w16 x 36 w16 x 31 w12 x 45 w12 x 26 w12 x 2 in. 0.715 0.630 0.565 0.430 0.440 0.575 0.380 0.425 in. 6.72 6.68 6.65 6.51 in. 16.43 16.26 16.13 15.86 15.88 12.06 12.22 12.31 in, 0.430 0.380 0.345 0.295 0.275 0.335 0.230 0.260 in. 7.120 7.070 7.035 6.985 5.525 8.045 6.490 4.030 in in, 1.60 1.59 1.57 1.52 1.17 1.94 1.51 0.847 758 659 586 448 375 350 204 156 43.1 37.2 32.8 24.5 12.4 50.0 17.3 4.66 12.1 10.5 9.34 7.00 4.49 12.4 5.34 2.31 92.2 14.7 72.7 56.5 47.2 58.1 33.4 25.4 10.6 13.2 7.65 6.48 4.91 w16 x 31 o w16x36 w12 x 2 o w12 x45

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

Answer

You know the right answer?

The allowable bending stress is ơallow-24 ksi and the allowable shear stress is tallow-14 ksi 10 kip...

Questions