subject
Engineering, 04.12.2019 00:31 alialoydd11

In a language of your own choosing, write a computer program that emulates a batcher-banyan network with 8 inputs and 8 outputs. for this project, you don’t need to implement a bitonic sorter; you may use any sorting algorithm you wish. in addition to program source code, provide a screenshot showing the deliverable are identified below. demonstrate that your program works in the following input cases by showing, the before and after of packet sorting, and where each packet travels at each stage of your multistage network. a. one packetb. two packets (different destinations)c. four packets (different destinations)d. six packets (different destinations)e. seven packets (different destinations)f. skip the sorting stage to show an example of output port contention with two packets destined for the same output portg. skip the sorting stage to show an example of path contention with two packets destined for the same shared link

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
In a language of your own choosing, write a computer program that emulates a batcher-banyan network...
Questions
question
Mathematics, 28.08.2019 06:50
question
History, 28.08.2019 06:50
question
History, 28.08.2019 06:50
Questions on the website: 13722367