Engineering, 04.12.2019 00:31 kbruner20
Hint: you can assume the load is enough to bend the beam more than the starting 0.2mm gap. in this case, the overall deflection due to bending (a superposition of the distributed load minus the reaction force at b) will be equal to the gap plus the amount that the post is compressed (think chapter
Answers: 1
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Hint: you can assume the load is enough to bend the beam more than the starting 0.2mm gap. in this...
Mathematics, 05.05.2020 05:47
Chemistry, 05.05.2020 05:47
History, 05.05.2020 05:47
Chemistry, 05.05.2020 05:47
English, 05.05.2020 05:47
Mathematics, 05.05.2020 05:47
Mathematics, 05.05.2020 05:47
Mathematics, 05.05.2020 05:47