Engineering, 04.12.2019 06:31 fzzyy

Aturbojet is at an altitude of 35,000 ft traveling at a mach number of 0.7. it has an inlet area of 8 ft^2 and an exit area of 5 ft^2. the exit velocity is 1700 ft/s and the exit pressure is 700 lb/ft2. the fuel-to-air ratio (by mass) is 0.05.
a. ignoring the mass of the fuel, calculate the thrust produced by the turbojet.
b. recalculate the thrust of the turbojet but do not ignore the mass of the fuel.
c. what is the percent error in ignoring the mass of the fuel when calculating the thrust?
d. the turbojet has a diffuser after the engine inlet. at the end of the diffuser, the mach number is 0.2. calculate the pressure at the end of the diffuser. (hint: the flow is isentropic so the total pressure will be constant)
e. estimate the thrust of this turbojet engine at sea level.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

You know the right answer?

Aturbojet is at an altitude of 35,000 ft traveling at a mach number of 0.7. it has an inlet area of...

Questions