Engineering, 05.12.2019 01:31 jaqwannewsome
Two 0.5 cm-diameter rods of 1020 steel (σts = 395 mpa) are to be joined with a silver braze alloy 0.025 cm thick (σys = 145 mpa) to produce one long rod. the ultimate strength of this brazed structure is found to be approximately 345 mpa. if it is necessary to reduce the diameter of the rods to 0.25 cm with no change to the braze joint itself, will the strength (in mpa units) increase, decrease, or remain the same? if it changes, by how much?
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
You know the right answer?
Two 0.5 cm-diameter rods of 1020 steel (σts = 395 mpa) are to be joined with a silver braze alloy 0....
Questions
Chemistry, 19.10.2019 21:50
English, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Mathematics, 19.10.2019 21:50
Computers and Technology, 19.10.2019 21:50
Social Studies, 19.10.2019 21:50
