Engineering, 05.12.2019 18:31 dhailyortegacampa131
Along, cylindrical, electrical heating element of diameter 10 mm, thermal conductivity 240 w/m·k, density 2700 kg/m3, and specific heat 900 j/kg·k is installed in a duct for which air moves in cross flow over the heater at a temperature and velocity of 27°c and 20 m/s, respectively.
(a) neglecting radiation, estimate the steady-state surface temperature when, per unit length of the heater, electrical energy is being dissipated at a rate of 1000 w/m.
(b) if the heater is activated from an initial temperature of 27°c, estimate the time required for the surface temperature to come within 10°c of its steady-state value. evaluate the properties of air at 450 k.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
You know the right answer?
Along, cylindrical, electrical heating element of diameter 10 mm, thermal conductivity 240 w/m·k, de...
Questions
History, 12.02.2020 02:57
Mathematics, 12.02.2020 02:57
Mathematics, 12.02.2020 02:57
Mathematics, 12.02.2020 02:57
Mathematics, 12.02.2020 02:57
Mathematics, 12.02.2020 02:57
Mathematics, 12.02.2020 02:57
