Engineering, 05.12.2019 19:31 hannahbaak
To what thickness (height) can a solid cylinder of aluminum alloy (7075) that is 30 mm in diameter and 50 mm high be forged in a press that can generate a forging force of 1mn. assume no friction between the contact faces of the press and workpiece, and fy = 500 mpa is constant throughout the forging operation. also, estimate the true strain (absolute) at the end of the stroke.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
To what thickness (height) can a solid cylinder of aluminum alloy (7075) that is 30 mm in diameter a...
Questions
Chemistry, 14.06.2020 01:57
History, 14.06.2020 01:57
History, 14.06.2020 01:57
English, 14.06.2020 01:57
