subject
Engineering, 05.12.2019 22:31 ziaa9690

Fish and wildlife managers have determined that a sudden temperature increase greater than 5°c would be harmful to the marine ecosystem of a river. warmer waters contain less dissolved oxygen and cause organisms in a river to increase their metabolism; if the temperature increase is sudden, the organisms do not have time to adapt to the new environment and likely will die. (changes in river temperatures of five degrees and more due to seasonal temperature variations are common, but those temperature change are gradual.)

a proposed chemical plant plans to use river water for process cooling. the river flows at a rate of 15.0 m3/s at a temperature of 15°c, and a fraction of it will be diverted to the plant.

preliminary calculations reveal that the cooling water will remove 5.00×105kj/s of heat from the plant. a portion of the extracted water will evaporate from the plant into the atmosphere, and the remainder will be returned to the river at a temperature of 35°c.

(a) draw and completely label a flowchart of the process and prove there is enough information available to calculate all of the unknown stream flow rates on the chart.

(b) estimate the fraction of the river flow that must be diverted to the plant and the percentage of the cooling water that evaporates. assume that water has a constant heat capacity of 4.19 kj/(kg°c) and a heat of vaporization roughly that of water at normal boiling point, and also assume that the specific enthalpy of the water vapor relative to liquid water at 15°c equals the heat of vaporization.

(c)write (but don’t evaluate) an expression for the enthalpy change neglected by the assumption about the specific enthalpy of the steam.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Fish and wildlife managers have determined that a sudden temperature increase greater than 5°c would...
Questions
question
Mathematics, 13.03.2020 17:26
question
Mathematics, 13.03.2020 17:26
Questions on the website: 13722367