subject
Engineering, 06.12.2019 01:31 nulledcracker12

You purchased a computer with the following features: • 95% of all memory accesses are found in the cache.• each cache block is two words, and the whole block is read on any miss.• the processor sends references to its cache at the rate of 109 words per second.• 25% of those references are writes.• assume that the memory system can support 109 words per second, reads or writes.• the bus reads or writes a single word at a time (the memory system cannot read or write two words at once).• assume at any one time, 30% of the blocks in the cache have been modified.• the cache uses write allocate on a write miss.• you are considering adding a peripheral to the system, and you want to know how much of the memory system bandwidth is already used. calculate the percentage of memory system bandwidth used on the average in the two cases below. be sure to state your assumptions. a. case 1: the cache is write through. b. case 2: the cache is write back.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 19:10
Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.
Answers: 2
You know the right answer?
You purchased a computer with the following features: • 95% of all memory accesses are found in the...
Questions
question
Mathematics, 03.11.2020 08:20
question
Chemistry, 03.11.2020 08:20
question
Mathematics, 03.11.2020 08:20
question
Mathematics, 03.11.2020 08:20
question
Mathematics, 03.11.2020 08:20
Questions on the website: 13722361