subject
Engineering, 10.12.2019 07:31 Lilyy1k

A2.0 v battery is rated at 5 ah. during continuous use, with the battery supplying a current of 200 ma, the battery voltage stays substantially constant at 2.0 v for the first 18 hours. during the next 12 hours, the voltage drops linearly to 1.76 v whereas the current drops linearly to 100 ma. at this point the battery is no longer considered useful. (a) how much energy was delivered by the battery during the 30 hours? (b) plot the battery voltage curve using matlab (x-axis is time in seconds and y-axis is voltage in volts). (c) plot the battery current curve using matlab (x-axis is time in seconds and y-axis is voltage in ampere). (d) plot the battery power curve using matlab (x-axis is time in seconds and y-axis is voltage in watt).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
You know the right answer?
A2.0 v battery is rated at 5 ah. during continuous use, with the battery supplying a current of 200...
Questions
Questions on the website: 13722360