subject
Engineering, 11.12.2019 19:31 evelynalper08

Problem 9.020 a thin-walled container ( 200 mm) with a hot process fluid at [infinity] 55°c is placed in a quiescent, cold water bath at [infinity] 10°c. heat transfer at the inner and outer surfaces of the container may be approximated by free convection from a vertical plate. determine the overall heat transfer coefficient between the hot process fluid and the cold water bath, in w/m2·k. assume the properties of the hot process fluid are those of water. initially assume [infinity] [infinity] and evaluate the properties of the hot process fluid and the cold water bath at the film temperatures for the respective container surfaces. use the churchill and chu correlation for nusselt number on a vertical plate.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
You know the right answer?
Problem 9.020 a thin-walled container ( 200 mm) with a hot process fluid at [infinity] 55°c is place...
Questions
Questions on the website: 13722362