subject
Engineering, 11.12.2019 19:31 kathrynsalomon

The purpose of this exercise is to create finite state machine (fsm) which can detect a

certain eight digit binary sequence in a continuous serial binary input stream. when the

correct sequence is detected, the single output signal should be a logical true value, in all

other cases it should be a logical false. this exercise is designed to allow a gradual

transition from strictly combinational circuits to a simple sequential circuit. note that this

lab assignment is a group assignment with each group having 2 students.

problem statement: the "gottcha anti-theft" machine

there are many anti-theft devices on the market that attempt to foil a would-be robber

from starting your car and driving off with it. one popular item has a keypad like a touchtone

telephone. in order to start your car, you must key in a secret four digit decimal

code, such as '3719'. it only "remembers" the most recent four digits you have keyed in.

thus the sequence '3723719' will let you start your car.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 06.07.2019 02:30
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
question
Engineering, 06.07.2019 04:20
Derive the 2-d finite difference equation for a uniform grid for a node: a) at a plane surface with a uniform heat flux b) at an internal corner with convection
Answers: 1
question
Engineering, 11.07.2019 00:40
A8-in.-diameter steel shaft is to have a press fit with a 16-in-diameter cast iron hub. both the hub and the shaft are 10 in long. using maximum normal stress theorem and appropriate safety factor, it was identified that the maximum allowable circumferential (a.k.a. hoop or tangential) stress in the hub is to be 7.5 ksi. the moduli of elasticity are 30 x 106 psi for steel and 15 x 106 psi for cast iron. the poisson's ratio for both steel and cast iron is 0.3 and coefficient friction for the two materials is 0.12. determine a)-the interference or the original mismatch. b)-the maximum axial force required to press the hub on the shaft.
Answers: 3
You know the right answer?
The purpose of this exercise is to create finite state machine (fsm) which can detect a

...
Questions
question
Mathematics, 25.03.2021 06:30
question
Mathematics, 25.03.2021 06:30
question
Mathematics, 25.03.2021 06:30
question
Mathematics, 25.03.2021 06:30
question
Mathematics, 25.03.2021 06:30
Questions on the website: 13722362