subject
Engineering, 11.12.2019 23:31 alexiscorey7051

3a. consider a solar panel system composed of 100 w modules (i. e., panels) that is coupled with a lead acid battery storage system to be used for a small business. you only plan to store electricity overnight. assume that the panels produce electrical energy 8.00 hours each day and that the electrical energy is used steadily throughout the day. size the system so that you can provide 48.0 kwh per day. the capacity factor of the solar panels is 15.0%. the voltage controller efficiency is 90.0%. the round trip efficiency is 78.0%. the depth of discharge is 80.0%. during the day when power is available from the panels it is provided directly to the house and is not stored in the batteries. the cell efficiency is 17%. the installed cost of the system is $4.00/w including the pv panels, battery storage, inverters, and modifications to the house. the system has a solar access factor of 95%, a cleanliness factor of 98%, a temperature derate factor of 0.88, wiring and mismatch loss reduction factor 95%, an inverter efficiency of 90%, and a storage efficiency (i. e., round trip efficiency) of 95% based on input energy. assume that all power delivered by the system is provided through the batteries. solar insolation in the region average averages 250 w/m2 year round. the system may be purchased with a 20 year payback period at an interest rate of 6%. o& m costs are $0.01/kwh. the household has an annual electricity usage of 11,000 kwh. each panel requires 0.72 m2 of roof area.

how much power do the panels need to provide directly to the house (kwh/day)?

how much power do the panels need to provide to the batteries (kwh/day)?

what is the needed rated capacity of the solar panels (kw)?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
question
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
question
Engineering, 06.07.2019 04:20
Consider a spherical container of inner radius , outer radius r2, and thermal conductivity k. express the boundary condition on the inner surface of the container for steady one-dimensional conduction for the following cases: (a) specified temperature of 50°c, (b) specified heat flux of 30 w/m2 toward the center, (c) convection to a medium at t with a heat transfer coefficient of h
Answers: 2
You know the right answer?
3a. consider a solar panel system composed of 100 w modules (i. e., panels) that is coupled with a l...
Questions
question
Chemistry, 21.04.2021 23:30
question
Mathematics, 21.04.2021 23:30
question
Mathematics, 21.04.2021 23:30
Questions on the website: 13722361