Engineering, 12.12.2019 05:31 josephvcarter
It is necessary to fabricate an aligned and discontinuous glass fiber–epoxy matrix composite having a longitudinal tensile strength of 1200 mpa using a 0.35 volume fraction of fibers. compute the required fiber fracture strength, assuming that the average fiber diameter and length are 0.015 mm and 5.0 mm, respectively. the fiber–matrix bond strength is 80 mpa, and the matrix stress at composite failure is 6.55 mpa
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
It is necessary to fabricate an aligned and discontinuous glass fiber–epoxy matrix composite having...
Mathematics, 10.10.2019 10:30
Mathematics, 10.10.2019 10:30
French, 10.10.2019 10:30
English, 10.10.2019 10:30
Advanced Placement (AP), 10.10.2019 10:30
Spanish, 10.10.2019 10:30
Social Studies, 10.10.2019 10:30
Spanish, 10.10.2019 10:30