Engineering, 13.12.2019 01:31 meiyrarodriguez
Carbon steel (aisi 1010) shafts of 0.1-m diameter are heat treated in a gas-fired furnace whose gases are at 1200 k and provide a convection coefficient of latex: 100\: \frac{w}{m^2.k}100 w m 2 . k. if the shafts enter the furnace at 300 k, how long (in seconds) must they remain in the furnace to achieve a center-line temperature of 800 k?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
You know the right answer?
Carbon steel (aisi 1010) shafts of 0.1-m diameter are heat treated in a gas-fired furnace whose gase...
Questions
Computers and Technology, 01.08.2020 04:01
Arts, 01.08.2020 05:01
Computers and Technology, 01.08.2020 05:01
Mathematics, 01.08.2020 05:01
History, 01.08.2020 05:01
