12–75 the emissivity of a tungsten filament can be approximated to be 0.5 for radiation at wavelengths less than 1 mm and 0.15 for radiation at greater than 1 mm. determine the average emissivity of the filament at (a) 2000 k and (b) 3000 k. also, determine the absorptivity and reflectivity of the filament at both temperatures.

What precautions should you take to prevent injuries when dealing with heavy loads?

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way