Engineering, 13.12.2019 22:31 brae0

Airflow through a long, 0.25-m-square air conditioning duct maintains the outer duct surface temperature at 10°c. if the horizontal duct is uninsulated and exposed to air at 35°c in the crawlspace beneath a home, what is the heat gain per unit length of the duct? evaluate the properties of air at 300 k. for the sides of the duct, use the more accurate churchill and chu correlations for laminar flow on vertical plates.

a. what is the rayleigh number for free convection on the outer sides of the duct? b. what is the free convection heat transfer coefficient on the outer sides of the duct, in w/m2·k? c. what is the rayleigh number for free convection on the top of the duct? d. what is the free convection heat transfer coefficient on the top of the duct, in w/m2·k? e. what is the free convection heat transfer coefficient on the bottom of the duct, in w/m2·k? f. what is the total heat gain to the duct per unit length, in w/m?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

You know the right answer?

Airflow through a long, 0.25-m-square air conditioning duct maintains the outer duct surface tempera...

Questions