Engineering, 14.12.2019 02:31 BIKRAMlawati5544
Aspacer made of sae 1020 hot-rolled steel is in the form of a hollow cylinder with a nominal inside diameter of 3.2500 in and an outside diameter of 4.000 in. it is to be mounted on a solid steel shaft with a heavy force fit. specify the dimensions for the shaft and sleeve, and compute the stresses in the sleeve and shaft after installation at maximum interference. also determine the deformation of the sleeve and shaft. use the basic hole system. the modulus of elasticity of steel, e = 30 × 106 psi and poisson’s ratio, = 0.29.
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
Engineering, 06.07.2019 02:30
1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction
Answers: 1
Engineering, 06.07.2019 03:30
State the stress optic law in two dimension and obtain an expression for the same.
Answers: 2
Aspacer made of sae 1020 hot-rolled steel is in the form of a hollow cylinder with a nominal inside...
Mathematics, 19.03.2020 00:39
History, 19.03.2020 00:39
English, 19.03.2020 00:39
Mathematics, 19.03.2020 00:39
Social Studies, 19.03.2020 00:39
Mathematics, 19.03.2020 00:39
Mathematics, 19.03.2020 00:39
English, 19.03.2020 00:39
Biology, 19.03.2020 00:39