Engineering, 14.12.2019 03:31 shandrablue9348
Awood pole with a diameter of 10 in. has a moisture content of 5%. the fiber saturation point (fsp) for this wood is 30%. the wood shrinks or swells 1% (relative to the green dimensions) in the radial direction for every 5% change in moisture content below fsp. c. what would be the new diameter with the increase in moisture content mentioned in part (a)?
Answers: 2
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Awood pole with a diameter of 10 in. has a moisture content of 5%. the fiber saturation point (fsp)...
Mathematics, 14.04.2020 22:32
Mathematics, 14.04.2020 22:32
Physics, 14.04.2020 22:32
English, 14.04.2020 22:32
Computers and Technology, 14.04.2020 22:33