Engineering, 16.12.2019 21:31 mariaceleste110505

Asinusoidal wave on a transmission line is specified by voltage and current in phasor form: v s ( z ) = v 0 e α z e j β z and i s ( z ) = i 0 e α z e j β z e j ϕ where v0 and i0 are both real. (a) in which direction does this wave propagate and why? (b) it is found that α = 0, z0 = 50 ω, and the wave velocity is vp = 2.5 × 108 m/s, with ω = 108 s−1. evaluate r, g, l, c, λ, and ϕ.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

You know the right answer?

Asinusoidal wave on a transmission line is specified by voltage and current in phasor form: v s ( z...

Questions