Engineering, 17.12.2019 06:31 nanagardiner08

Dry air enters a device operating at steady state at 25oc, 2 bar with a volumetric flow rate of 300 m3/min. liquid water is injected and moist air stream exists at 15oc, 2 bar and 85% relative humidity.
ignore the heat transfer between the device and its surrounding and neglect kinetic and potential energy effects. determine

(a) the mass flow rate at the exit, in kg/min.

(b) the temperature, in oc, of the liquid water injected into the air stream.

c) now assume that heat transfer occurs from the device to its surrounding at a rate equal to 20 kw. determine the temperature, in oc, of the liquid water injected into the air stream.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)

Answers: 3

Answer

You know the right answer?

Dry air enters a device operating at steady state at 25oc, 2 bar with a volumetric flow rate of 300...

Questions