Engineering, 17.12.2019 21:31 AllanCasey12
An engineer from nebraska is grinding along the work at 0.4 m/s with a wheel speed of 1600 m/min. the depth of cut is 0.05 mm and the wheel diameter is 125 mm. the crossfeed is 6 mm, and the number of active grits are 75 grits/cm2 determine (a) average length per chip (mm). (b) metal removal rate (mm/min), and (c) number of chips formed per unit time during grinding
Answers: 2
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
An engineer from nebraska is grinding along the work at 0.4 m/s with a wheel speed of 1600 m/min. th...
Mathematics, 17.11.2020 21:30
Mathematics, 17.11.2020 21:30
English, 17.11.2020 21:30
History, 17.11.2020 21:30
Biology, 17.11.2020 21:30
Mathematics, 17.11.2020 21:30
Mathematics, 17.11.2020 21:30