Engineering, 17.12.2019 22:31 SoccerHalo

Acompletely mixed activated-sludge plant is being designed for a wastewater flow of 5.0 mgd. the soluble bod concentration of the influent to the aeration basin is 200 mg/l. the effluent soluble bod requirement is 10 mg/l. the mean cell residence time is to be 8.0 days at an mlss concentration of 2500 mg/l. from pilot plant data, y = 0.6 lb vss/lb bod, kd = 0.06 day–1 , and 80% of the mlss are vss.
calculate:
a) the volume of the aeration basin, in gals.
b) the dry mass of excess solids in the waste sludge in lb/day.
c) the aeration period, q in hours.
d) food-to-microorganism ratio, f/m.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.

Answers: 1

Answer

You know the right answer?

Acompletely mixed activated-sludge plant is being designed for a wastewater flow of 5.0 mgd. the sol...

Questions