Engineering, 18.12.2019 04:31 nauticatyson9

The dorben co. uses a standard hour plan with a base wage of $9.00/hour. it hires an ie consultant to plan a batch production run of 300 units. this consultant has a worker on the line produce two units. the first takes 10 minutes and the second 9.7 minutes.

a) find the equation of the learning curve?
b) what is the % learning?
c) how long would it take the worker to reach the standard time of 8.0 minutes
d) assume that the worker tries to improve and earn the incentive pay. what would the worker be paid for the first 20 hours under the standard-hour plan?
e) assuming that the worker continues to improve his performance, what will he be paid for the full batch of 300 units under the standard-hour plan?
f) what is the unit cost for the first unit made? what is the cost for 300th unit?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

You know the right answer?

The dorben co. uses a standard hour plan with a base wage of $9.00/hour. it hires an ie consultant t...

Questions