subject
Engineering, 18.12.2019 20:31 DESI111609

When immersed in a uniform stream, a thick elliptical plane cylinder creates a broad downstream wake, as idealized in fig. p3.72. the pressure at the upstream and downstream sections are approximately equal, and the fluid is water at 208c. ifu054m/sandl580cm, estimatethedrag 1 cm force on the cylinder per unit width into the paper. also compute the dimensionless drag coefficient cd 5 2f/(rhou20bl).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
When immersed in a uniform stream, a thick elliptical plane cylinder creates a broad downstream wake...
Questions
question
Social Studies, 12.05.2021 18:20
question
Biology, 12.05.2021 18:20
Questions on the website: 13722363