Engineering, 18.12.2019 21:31 cgarnett5408
Water flows through a horizontal 60-mm-diameter galvanized iron pipe at a rate of 0.02 m 3/s. if the pressure drop is 135 kpa per 10 m of pipe, do you think this pipe is
(a) a new pipe,
(b) an old pipe with a somewhat increased roughness due to aging, or
(c) a very old pipe that is partially clogged by deposits
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
Water flows through a horizontal 60-mm-diameter galvanized iron pipe at a rate of 0.02 m 3/s. if the...
Questions
Business, 11.04.2021 18:20
Mathematics, 11.04.2021 18:20
Mathematics, 11.04.2021 18:20
Mathematics, 11.04.2021 18:20
Mathematics, 11.04.2021 18:20
English, 11.04.2021 18:20
English, 11.04.2021 18:20
Social Studies, 11.04.2021 18:20
History, 11.04.2021 18:20
Mathematics, 11.04.2021 18:20
Business, 11.04.2021 18:20
Social Studies, 11.04.2021 18:20
