subject
Engineering, 20.12.2019 00:31 ligittiger12806

Dexter industries purchased packaging equipment on january 8 for $72,000. the equipment was expected to have a useful life of three years, or 18,000 operating hours, and a residual value of $3,600. the equipment was used for 7,200 hours during year 1, 5,400 hours in year 2, and 5,400 hours in year 3. required: 1. determine the amount of depreciation expense for the three years ending december 31, by (a) the straight-line method, (b) the units-of-activity method, and (c) the double-declining-balance method. also determine the total depreciation expense for the three years by each method. round the final answers for each year to the nearest whole dollar.1) find the force transmitted by the coupling between the nozzle and hose. 2) indicate whether the coupling is in tension or compression. 3) find the velocity of water flowing through the hose.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 19:20
Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers
Answers: 3
question
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
question
Engineering, 06.07.2019 04:10
Aheat pump with refrigerant-134a as the working fluid is used to keep a space at 25°c by absorbing heat from geothermal water that enters the evaporator at 500c at a rate of 0.065 kg/s and leaves at 40°c. the refrigerant enters the evaporator at 20°c with a quality of 23 percent and leaves at the inlet pressure as saturated vapor. the refrigerant loses 300 w of heat to the surroundings as it flows through the compressor and the refrigerant leaves the compressor at 1.4 mpa at the same entropy as the inlet. determine: (a) the degrees of subcooling of the refrigerant in the condenser, b)-the mass flow rate of the refrigerant . (c) the heating load and the cop of the pump, and d)-the theoretical minimum power input to the compressor for the same heating load.
Answers: 3
question
Engineering, 06.07.2019 04:10
Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg.k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft
Answers: 1
You know the right answer?
Dexter industries purchased packaging equipment on january 8 for $72,000. the equipment was expected...
Questions
question
Mathematics, 23.09.2021 01:00
question
History, 23.09.2021 01:00
question
Mathematics, 23.09.2021 01:00
Questions on the website: 13722359