The post is made from 6061-t6 aluminum and has a diameter of 50 mm. it is fixed supported at a and b, and at its center c there is a coiled spring attached to the rigid collar. 0.25 m 0.25 m k = 200 mn/m > b part a if the spring is originally uncompressed, determine the compression in the spring when the load of p = 70 kn is applied to the collar. express your answer to three significant figures and include appropriate units. hår o 2 ? opp = .129 mm submit previous answers request answer x incorrect; try again; 5 attempts remaining

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?