Engineering, 28.12.2019 04:31 aspenbaxter201634

Given the following access-control list: access-list 90 deny 10.168.7.0 0.0.0.255 access-list 90 permit host 10.168.7.10 access-list 90 permit host 10.168.7.11 access-list 90 permit host 10.168.7.12 access-list 90 deny any what would be the end result if the network security engineer applies access-list 90 to the inbound interface of fastethernet 0/3? group of answer choices a. the access-list will permit host 10.168.7.10 to pass through the router. b. the access-list will permit host 10.168.7.15 to pass through the router. c. denial of service for this network because the rules are not placed in the correct order. d. both hosts 10.168.7.10 and 10.168.7.11 will be permitted. e. the access-list will generate an error message.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?

Answers: 1

Answer

Engineering, 06.07.2019 02:30

1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction

Answers: 1

Answer

You know the right answer?

Given the following access-control list: access-list 90 deny 10.168.7.0 0.0.0.255 access-list 90 pe...

Questions