Engineering, 07.01.2020 23:31 madisynk78
The average on a history exam (scored out of 100 points) was 85, with a standard deviation of 15. is the distribution of the scores on this exam symmetric? if not, what shape would you expect this distribution to have? explain your reasoning.
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:20
Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.
Answers: 1
Engineering, 06.07.2019 04:20
Amachine of mass 140 kg is mounted on springs of stiffness 1.4x10ยฐ n/m and in parallel witha viscous damper of unknown damping coefficient. the machine is subject to a harmonic excitation of 200sin150t n. the phase angle is measured as 2.58 rad. what is the damping coefficient of the viscous damper?
Answers: 2
Engineering, 06.07.2019 05:20
List the variables that can affect the magnitude of the temperature rise and its distribution throughout a workpiece in sliding contact.
Answers: 2
The average on a history exam (scored out of 100 points) was 85, with a standard deviation of 15. is...
Mathematics, 02.07.2020 18:01
Business, 02.07.2020 18:01
Mathematics, 02.07.2020 18:01
Chemistry, 02.07.2020 18:01
Mathematics, 02.07.2020 18:01
Mathematics, 02.07.2020 18:01
Chemistry, 02.07.2020 18:01