Engineering, 16.01.2020 17:31 eelebron0905

Amanufacturer provides a warranty against failure of a carbon steel product within the first 30 days after sale. out of 1000 sold, 10 were found to have failed by corrosion during the warranty period. total cost of replacement for each failed product is approximately $100,000, including the cost of environ-mental clean-up, loss of product, downtime, repair, and replacement. a. calculate the risk of failure by corrosion, in dollars. b. if a corrosion-resistant alloy would prevent failure by corrosion, is an incremental cost of $100 to manufacture the product using such an alloy justified? what would be the maximum incremental cost that would be justified in using an alloy that would prevent failures by corrosion?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

Amanufacturer provides a warranty against failure of a carbon steel product within the first 30 days...

Questions