Derive the following conversion factors:

(a) convert a volume flow rate in cubic inches per minute to cubic millimeters per minute.

(b) convert a volume flow rate in cubic meters per second to gallons per minute (gpm).

(c) convert a volume flow rate in liters per minute to gpm.

(d) convert a volume flow rate of air in standard cubic feet per minute (scfm) to cubic meters per hour.

a standard cubic foot of gas occupies one cubic foot at standard temperature and pressure (t = 15∘ c and p= 101: 3 kpa absolute).

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation