subject
Engineering, 27.01.2020 21:31 Mattorth512345

Address space, memory consider a hypothetical 18-bit processor called hyp18 with all registers, including pc and sp, being 18 bits long. the smallest addressable unit in memory is an 8-bit byte. a. (4 points) what is the size of hyp18's address space in bytes and kb? how many address lines does hyp18 require? address space: address space: kb (kilobytes). bytes address bus lines: b. (6 points) assume that first quarter of the address space is dedicated for hyp18's ram memory and the upper half of the address space is reserved for hyp18's flash memory. give address ranges for the ram and flash memories. fill in the table below. what is the size of the ram memory and the flash memory? start byte address end byte address ram memory flash memory ram memory size [bytes/kb]: flash memory size [bytes/kb]: the msp430f20× is a microcontroller with 64 kb of address space divided between code memory (flash), ram memory, and input/output peripherals. it has 1,024 bytes of ram memory starting at the address 0x0200, and 256 bytes of address space reserved for special purpose registers and 8-bit input/output peripherals (starting at the address ox) followed by 256 bytes reserved for 16-bit input/output peripherals. the flash memory of 16 kb resides at the top of address space (highest addresses in the address space).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
You know the right answer?
Address space, memory consider a hypothetical 18-bit processor called hyp18 with all registers, incl...
Questions
question
Mathematics, 19.06.2020 09:57
question
Physics, 19.06.2020 09:57
Questions on the website: 13722362