Engineering, 29.01.2020 09:40 mm016281

Calculate all reaction and member forces for the truss below. show all work in your extra sheet of paper, allowing plenty of room for fbds and calculations. make sure all work is legible and neat. be sure to list all formulas, substitutions, and solutions clearly. when you have resolved all forces, draw the fbd for the entire structure at the bottom of your graph paper, showing all applied, reaction, and member forces including type of force.

precision = 0.00 drawing not to scale

-negative 575 lbs on joint b
-roller on joint a
-puller on joint c
-6' from joint a to d
- 3' from d to c
-5' from d to b
- 4 joints
-5 members
- 3 reaction forces
-shaped as a triangle bisected by bd

1.what is the measure of angle bac?
2.what is the measure of angle bcd?
3.what is the magnitude and direction of the reaction force at roller joint a?
4.what is the force on member ab?
5.what is the force on member dc?
6.what is the force on member bc?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

Answer

You know the right answer?

Calculate all reaction and member forces for the truss below. show all work in your extra sheet of p...

Questions