What output force (Fout) is produced if the lever arm length (rout) is 100 mm?
A) 3.4 N
...
Engineering, 09.02.2020 21:07 ruben0018
What output force (Fout) is produced if the lever arm length (rout) is 100 mm?
A) 3.4 N
B) 118 N
C) 1.7 N
D) 1.4 N
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Questions
Health, 28.01.2021 22:20
Mathematics, 28.01.2021 22:30
Mathematics, 28.01.2021 22:30
Mathematics, 28.01.2021 22:30
Chemistry, 28.01.2021 22:30
Chemistry, 28.01.2021 22:30
History, 28.01.2021 22:30
Spanish, 28.01.2021 22:30
Mathematics, 28.01.2021 22:30
Business, 28.01.2021 22:30
Mathematics, 28.01.2021 22:30
