Engineering, 11.02.2020 04:03 bnvghnbbb

An electrical current of 700 A flows through a stainless-steel cable having a diameter of 5 mm and an electrical resistance of 6 x 10^-4 Ω/m (i. e., per meter of cable length). The cable is in an environment having a temperature of 30°C, and the total coefficient associated with convection and radiation between the cable and the environment is approximately 25 W/m^2K.
(a) If the cable is bare, what is its surface temperature?(b) If a very thin coating of electrical insulation is applied to the cable, with a contact resistance of 0.02 m^2 K/W, what are the insulation and cable surface temperatures?(c) There is some concern about the ability of the insulation to withstand elevated temperatures. What thickness of this insulation (k 0.5 W/m K) will yield the lowest value of the maximum insulation temperature?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

You know the right answer?

An electrical current of 700 A flows through a stainless-steel cable having a diameter of 5 mm and a...

Questions