Engineering, 11.02.2020 19:21 nxusasmangaliso7596

Suppose that R1 = 50 Ω , R2 = 90 Ω , R3 = 80 Ω , R4 = 400 Ω , R5 = 100 Ω , and R6 = 70 Ω .

Part A
Use current division to find the current in R1 from left to right.
Express your answer to three significant figures and include the appropriate units.
Part B
Use the result from the previous part and current division to find the current in R6 from top to bottom.
Express your answer to three significant figures and include the appropriate units.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

You know the right answer?

Suppose that R1 = 50 Ω , R2 = 90 Ω , R3 = 80 Ω , R4 = 400 Ω , R5 = 100 Ω , and R6 = 70 Ω .

Questions