Engineering, 11.02.2020 19:43 babycakes08d

Two sections, A and B, are 5 kilometers apart along an old, 3-meter-diameter riveted-steel pipe. A is 125 meters higher than B. The water temperature is 20 degrees Celsius, and the pressure heads measured at A and B are 7.5 meters and 78.7 meters, respectively. Assume that minor losses are negligible.

a) Determine the flow rate through the pipe using the Darcy-Weisbach Equation.

b) Determine the flow rate through the pipe using the Hazen-Williams Equation.

c) Determine the flow rate through the pipe using the Manning’s Equation.

d) Compare the results.

Hint: Consider what effect the condition of the pipe will have when deciding on the appropriate roughness and coefficients.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

You know the right answer?

Two sections, A and B, are 5 kilometers apart along an old, 3-meter-diameter riveted-steel pipe. A i...

Questions